Kia Forte: Brake Line

Installation

1. Install in the reverse order of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Removal

1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...

See also:

Exhaust Manifold Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the front and rear oxyge ...

Inhibitor Switch Circuit Diagram
...

ECM Terminal And Input/Output signal (A/T)
ECM Terminal Function Connector [CNG-AA] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output Ignition Co ...