Kia Forte: Console Armrest Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
|
|
2. |
Loosen the console armrest mounting screws (A).

|
|
3. |
After loosening the mounting screws, then remove the console armrest
(A).

|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
See also:
Release Residual Pressure in Fuel Line
There may be some residual pressure even after “Release Residual
Pressure in Fuel Line” work, so cover the hose conn ...
Purge Control Solenoid Valve (PCSV) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the purge control solenoid valve connector (A) ...
Compressor Components
1. Center Bolt
2. Hub Bolt
3. Disc & Hub Assembly
4. Snap Ring
5. Pulley
6. Compressor Assembly
7. Electric Control Valve (ECV)
...