Kia Forte: Room Lamp Inspection - Lighting System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Room Lamp Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Room Lamp Inspection

Room Lamp
1.
Check that the switch operates properly after disconnecting the room lamp connector (A).

Head Lamp Aiming Instructions
The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions.   ...

Room Lamp Removal
Room Lamp 1. Disconnect the negative(-) battery terminal. 2. Carefully remove the lamp lens (A) from the room lamp with a flat-tip scre ...

See also:

Telemetics Unit (TMU) Component
Connector Pin Specification No. Pin Name Type From To Description (Wiring Spec.) 1 GND DC Ground TMU Batt ...

Installation
1. Install the BCM unit. 2. Install the center lower cover. 3. Install the floor console assembly. ...

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of you ...

Copyright www.kifomanual.com 2014-2026