Kia Forte: Cylinder Head Assembly

Timing Chain Installation

1. Check that the TDC marks on the intake and exhaust CVVT sprockets are slightly turned (about 2 to 3 teeth) from the TDC position after the timing chain has been rem ...

Components

1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Cam carrier 8. Cyli ...

See also:

Rear Coil Spring Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

Intake Air Temperature Sensor (IATS) Circuit Diagram
(M/T) (A/T) ...

Rheostat Inspection
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side switch assembly (A). 3. ...