Kia Forte: Fluid Components Location

Oil Pump Components

1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10. Bo ...

Fluid Service Adjustment Procedure

Oil level Check    A check of Automatic Transaxle Fluid (ATF) level is not normally required during scheduled ...

See also:

ESC Control Module Installation
1. Install in the reverse order of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. ...

Front Hub / Knuckle Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the ...

Specifications
AVN Head Unit Item Specification Power supply DC 14.4V negative ground Load Impedance 4ohm × 4 Tuning type PLL SYNTH ...