Kia Forte: Master Cylinder

Installation

1. Install in the reverse order of removal. 2. Tighten the vacuum pump mounting bolts to the specified torque. ...

Removal

1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). ...

See also:

Removal
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat ass ...

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage v ...