Kia Forte: Water pump Components

Water Temperature Control Assembly Removal and Installation

1. Remove the engine cover. 2. Drain the engine coolant. (Refer to Cooling System - "Coolant") 3. ...

Water pump Removal and Installation

1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive ...

See also:

Oil Pressure Switch Removal and Installation
1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 ~ 11.8N.m (1 ...

Crankshaft Reassembly
   • Thoroughly clean all parts to be assembled. • ...

Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly. Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P(Park) position f ...