Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.

Output Speed Sensor Installation
1. Install in the reverse order of removal.    After replacement or reinstal ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA) ...

See also:

ESC Operation Mode
1. STEP 1 The ESC analyzes the intention of the driver. 2. STEP 2 It analyzes the movement of the ESC vehicle. ...

Troubleshooting
Symptom Possible cause Remedy Tachometer does not operate Cluster fuse (10A) blown Check for short and replace fuse CAN line faulty ...

Heater & A/C Control Unit (Manual) Components
Connector Pin Function Connector No. Description Connector No. Description A 1 Ground B 14 In ...

Copyright © www.kifomanual.com 2014-2025