Kia Forte: AVN System

Installation

1. Install the horn and connect the horn connector. 2. Reassemble the front bumper cover. ...

Specifications

AVN Head Unit Item Specification Power supply DC 14.4V negative ground Load Impedance 4ohm × 4 Tuning type PLL SYNTH ...

See also:

Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

Replacement
Rear Brake Pads 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...

Specifications
Items Specifications Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temperature -22°F~176°F(-30°C~ 80°C) ...