Kia Forte: BCM Diagnosis With GDS
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / BCM (Body Control Module) / BCM Diagnosis With GDS
| 1. |
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the actuator.
|
| 2. |
To diagnose the BCM function, select the menu of model and body
control module.
|
| 3. |
Select "Input/output monitoring", if you will check current data
of body network system. It provides input/output status of each module.
|
| 4. |
If you will check each module data operation forcefully, select
"Actuation test".
|
| 5. |
If you want to change user option, select “user option”.
|
Installation
1.
Install the BCM unit.
2.
Install the center lower cover.
3.
Install the floor console assembly.
...
See also:
G-Sensor Calibration
1.
Ignition "OFF", connect GDS.
2.
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
...
BJ Boot Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...
Front Washer Motor Inspection
1.
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026