Kia Forte: Room Lamp Installation

Room Lamp

Vanity Lamp

Room Lamp Removal

Room Lamp 1. Disconnect the negative(-) battery terminal. 2. Carefully remove the lamp lens (A) from the room lamp with a flat-tip scre ...

Overhead Console Lamp Inspection

1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

See also:

PTC Heater Inspection
Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode ...

Accelerator Position Sensor (APS) Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Specifications
Item Specification Type Electric Power Steering System Steering gear Type Rack & Pinion Rack stroke 150 ± 1mm (5.9 ...