Kia Forte: Cooling System

Cylinder Block Installation

1. Assemble the other parts in the reverse order of disassembly.    In case the cylinder b ...

Coolant Refilling And Bleeding

   Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

See also:

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Steering Column Shroud Panel Component Location
1. Steering column shroud lower panel 2. Steering column shroud upper panel ...

Fuel Tank Installation
1. Install in the reverse order of removal. Fuel tank band installation nut: 39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...