Kia Forte: Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the smart junction box
(Refer to Body Electrical System - "Relay Box (Passenger Compartment)")
|
| 3. |
Disconnect clutch switch connector (A).
|
| 4. |
Remove the clutch switch (B) by loosening a nut (A).
|
Inspection
Component Inspection
1.
Remove the clutch switch.
(Refer to Clutch Switch - "Removal")
2.
Push the clutch switch in the di ...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the clutch switch.
(1)
Adjust the gab by rotating t ...
See also:
Control Shaft Complete Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...
Engine And Transaxle Assembly Installation
Installation is in the reverse order of removal.
Perform the following :
•
Adjust shift cable.
•
Adjust throttle cable.
...
Troubleshooting
Trouble Symptom
Probable cause
Remedy
Vehicle pulls to one side
Scoring of driveshaft ball joint
Replace
Wear, rattle or scoring of wheel b ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026