Kia Forte: Controller

Intake Actuator Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body -"Glove Box Housing") ...

Heater & A/C Control Unit (Manual) Components

Connector Pin Function Connector No. Description Connector No. Description A 1 Ground B 14 In ...

See also:

Rear Door Window Glass Component Location
(4Door, 5Door) 1. Rear door window glass ...

TJ Joint Components
[LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft 6. TJ boot band 7. TJ boot 8. Spider assembly 9. Snap ring 10. TJ c ...

Adjustment
Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...