Kia Forte: Vacuum Pump

Installation

1. Install in the reverse order of removal.    A. ...

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the vacuum pump connector (A). ...

See also:

Rear Hub - Carrier Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from ...

Inspection
1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column. 2. Check for continu ...

Starter Specification
Starter [Non-ISG type] Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth 13 Performance [No-load, 11 V] ...